Accton Technology VM2548 User Manual download pdf (Page 38)

Installing the VDSL Switch and Splitter

3-8

3. Check the front-panel LEDs as the switch is powered on to be sure the Power

LED is lit. If not, check that the power cable is correctly plugged in. The switch

will automatically select the setting that matches the connected input voltage.

Therefore, no additional adjustments are necessary when connecting it to any

input voltage within the range marked on the front panel.

4. The switch performs a self-diagnostic test upon power-on.

Note: The unit supports a “hot remove” feature which permits you to connect or

disconnect network cables without powering off the unit and without disrupting

the operation of the devices attached to the unit.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

No comments

Accton Technology VM2548 User Manual Page 38